Jasper Auto Repair
Jasper Auto Repair
There are 13 companies listed in our Auto Repair category for Jasper. This page shows listings 1 to 13.
If you'd like to check the Auto Repair category for other cities in Indiana click a link on the left.
- 815 Wernsing Road
Remanufacturing Quality Products Since 1942
- Products and Services
JASPER Engines, Transmissions & Differentials - 3 YR | 100,000 MILE WARRANTY
JASPER Gas Engines
When we as consumers decide to purchase a product – at least one of significant importance – our decision generally falls into the realm of value. We want to know that we are getting our expected return for the money we spend. There are times, though, that we focus too much on price, even on small purchases, only to find that the product does not perform to our expectations. We are either unhappy with our purchase, or we wind up spending more of our hard-earned money to buy what we really needed – or wanted - in the first place.
A strong case for a purchase decision based on value can be made when considering a major vehicle repair such as an engine replacement. After all, this is the vehicle that your family or business depends on to carry out a variety of day to day activities. Your car, truck, van or SUV ranks right up there on the list of things for which you do not want to experience an early failure.
When you purchase a JASPER reman engine, you’ve made a decision based on value. JASPER engines are remanufactured to the highest quality standards in the industry and tested or thoroughly inspected to be sure that they will perform to your expectations which your family or business can depend – and that means a lot for your peace of mind.
3 YEAR/100,000 MILE WARRANTY JASPER can offer this beefy warranty on our remanufactured gas engines because every one of them goes through our extensive "Do It Right" process that ensures worry-free operation.
Every JASPER reman gas engine is completely disassembled. Blocks, heads, connecting rods, crankshafts and camshafts are thoroughly cleaned through a variety of processes to remove contaminants that can result in premature wear to internal engine components and early engine failure.
CRANKSHAFTS are precision machined to exact tolerances with no odd size bearings or journals. Thrust surfaces (domestic engines) are micro-polished to provide precise surface finishes for smooth engine operation and reduced thrust bearing wear. Every journal is inspected and measured with critical accuracy. After machining, oil holes are chamfered to improve lubrication and every journal polished to a smooth finish for long bearing life. Crankshafts are thoroughly cleaned with special emphasis to flushing and brushing out oil passages to remove any contaminants.
CAMSHAFTS are inspected for wear, dimensional accuracy and gauged for straightness. Camshaft lobes are carefully machined to correct specifications. Each shaft is Parco-Lubricated to improve lubricant adhesion, especially during break-in. Any camshaft not meeting JASPER's exact specifications is replaced.
CYLINDERS are bored and honed to exact specifications. Most gas engines are torque plate honed - a process we learned from our involvement in NASCAR - that eliminates cylinder distortion after the head is bolted and torqued to the block. This process eliminates a major cause of engine blow-by. Blocks are carefully inspected for cracks and flaws through procedures such as magnetic particle inspection. Cylinder finish and size are closely monitored to industry surface finish standards as well as for accuracy and consistency. This assures smooth piston travel and engine performance. JASPER guarantees no odd size cylinders. The block to head mating surface is closely inspected and resurfaced as required to provide the correct surface finish for today's gasket materials.
CONNECTING RODS are machined and gauged to within a half a thousandth for improved operation, especially in today's engines. Rods are carefully machined to avoid taper and to the standard diameter of original equipment. All rods are checked for bend and twist to assure smooth operation.
HEADS are carefully inspected for cracks and flaws through procedures such as magnetic particle inspection. Every head is resurfaced to exact dimensional tolerances and the surface finish is carefully monitored for proper sealing with the block. Valve seats and guides are machined to exact specifications or replaced to assure correct valve alignment and seating and optimum engine performance.
ASSEMBLY Every gas engine is precisely assembled by trained JASPER builders with attention to detail.
WARRANTY: Install JASPER with confidence. Every JASPER remanufactured engine is backed by a nationwide warranty. Complete engines for passenger cars and light duty trucks receive a 3 year/100,000 mile (whichever occurs first) parts and labor warranty. (Ambulance, off-highway vehicles, package delivery, police, snow removal, taxi, tow truck, or any vehicle over 1 ton, 18 months or 100,000 miles, whichever occurs first.) A technical hotline (1-800-827-7455) and 24 hour 7 day emergency warranty information are also available. Talk to our team of automotive technicians today about a JASPER solution.
The best choice? JASPER Transmission. FASTER - EASIER - PEACE OF MINE - SAVES $$$$
If you didn’t intend to replace your vehicle before you experienced a transmission failure, why should you consider it now? Installing a stock replacement transmission from Jasper Engines and Transmissions will cost you considerably less than replacing your car, truck, van or SUV with a new or newer used vehicle. You likely have a level of comfort with your vehicle. You’re familiar with where all the buttons and knobs are, and you know your vehicle’s maintenance history – it’s been taken care of – something you can’t be aware of with the unknown history of a used vehicle. You purchased your present vehicle because you liked it. It has faithfully served you, your family or your business. And don’t forget about the “soft” costs that are associated with a vehicle – license, insurance and, of course, the taxes on the purchase of a new or different car, truck, van or SUV. You’ll save on all of these by keeping your present vehicle and giving it a new life with a reman transmission from JASPER. Just think, the money you save by keeping your present “ride” can be used for the other things that are important to you like saving for retirement, college expenses, that long awaited big vacation or putting more profit into your business.
JASPER offers stock replacement transmissions for an extremely broad range of applications. Most of these applications are available immediately from our huge inventory at our U.S. distribution network. With a JASPER remanufactured transmission, you can be up and running again in the time it takes to have someone else go through the process of tearing down and rebuilding your transmission.
WHY JASPER REMAN TRANSMISSIONS?
If the transmission in your vehicle fails, you as an individual or business are faced with a very important decision as to the repair options available to you. The question of how much it will cost generally comes to mind. The more important question, though, should be, “What should I do to get the best value for the money I spend?”
We, at times, focus too much on price, even if it is a small purchase, but find that the product does not meet the expectations we had for it. We become dissatisfied with our purchase and might even wind up spending more of our hard-earned money in order to get what we really needed to purchase the first time.
A purchase decision based on value is especially important when considering a major vehicle repair like a transmission replacement. This is the car, truck, van or SUV that your family or business depends on to carry out its day to day activities. Your vehicle is definitely one of the things you do not want to have an early failure.
When you make the decision to purchase a JASPER remanufactured transmission, you’ve made a value-based decision based. JASPER reman transmissions are built to the highest quality standards in the industry. JASPER automatic transmissions are live-run dynamometer tested to be sure that they meet and perform to your expectations in order to provide thousands of miles of reliable service. Your family or business can depend on remanufactured transmissions from JASPER for peace of mind driving.
JASPER remanufactures a complete line of Rear Axle Assemblies and Differentials including Dana, Chrysler, Spicer, Ford, and GM. Most popular chassis applications are available for immediate exchange. Toyota and other manufacturer's differentials are available with one day in-plant custom remanufacturing.
When it comes to remanufacturing differentials and rear axle assemblies, JASPER sets the standard, adhering to the measured standards of the original equipment manufacturer. Our state-of-the-art reman processes allow us to remain firmly on the cutting edge when it comes to remanufactured differentials.
Factory and distributor inventories together with a substantial stock of parts, allow us to provide overnight availability on over 500 models and ratios.
Remanufactured Differentials FAQ
What is the difference between a used, rebuilt and remanufactured differential?
USED. Used differentials are generally removed from a junkyard vehicle and may not even receive a surface cleaning to remove outside road dirt. Used differentials are normally not disassembled, internally cleaned, or inspected. Used or junkyard components often have high mileage along with a poor history of maintenance – this can be a failure waiting to happen. Used or junkyard differentials may also come from a vehicle that was involved in an accident. In this case, the differential may have unseen damage.
REBUILT. Rebuilding is the reconditioning of components by cleaning, inspecting and replacing broken or severely worn parts. Rebuilt component quality can vary widely and many rebuilt products come with only a short term warranty.
REMANUFACTURED. Remanufacturing is to make as closely to new as possible. Components are carefully inspected, checked against original equipment measured specifications for correct dimensional tolerances and precisely remanufactured. Replacement parts are new or requalified to meet exacting standards and tolerances. It’s important to note that later model vehicles are very noise sensitive, so care must be taken when selecting a replacement differential for your application. Used and rebuilt differentials may not take this issue into consideration.
What is the warranty on a JASPER remanufactured differential? Most applications are covered by a 3 Year/100,000 mile (whichever occurs first) nationwide warranty – parts and labor. Ambulance, automotive off-highway use, package delivery, police, snow removal, taxi, tow truck, transit bus or any vehicle over 1 ton receive a warranty of 18 Months or 100,000 Miles, whichever occurs first.
What is the difference between a standard/open differential and a limited slip differential? With a standard or open differential, the differential will send power to the wheel that is experiencing the least resistance when encountering loose gravel or ice, for example. A limited slip differential, however, will transmit more power to the wheel that is not spinning. Many people use the term PosiTraction for a limited slip differential.
Do you offer a remanufactured differential for my vehicle? JASPER has immediate or very fast turnaround on over 500 ratios and applications so chances are good that we have a remanufactured differential for your vehicle application. JASPER remanufactures practically any differential for cars, trucks, vans and SUVs, and for a number of foreign applications as well.
2 Wheel Drive / 4 Wheel Drive Rear Differentials
Jasper Engines and Transmissions offers a complete line of full-float and semi-float rear wheel drive differentials for Dana/Spicer, Dodge, Ford, GM, RAM and even Isuzu, Mercedes, Nissan and Toyota truck applications – up to 2 tons. The thorough remanufacturing processes of JASPER assure consistent quality and reliable performance:
- Housings are checked for straightness and, if necessary, are straightened with an industrial grade press.
- Bearings are preloaded to OEM specifications for longer bearing life, smooth operation and proper break-in.
- Loctite® is applied to bearing races to ensure maximum securement.
- Remanufactured differentials are inspected for correct backlash clearance to assure proper gear lubrication for reduced noise and to avoid overheating, especially in severe-duty applications.
- Tooth contact pattern is inspected and adjusted to utilize the full structure of the gear for minimum gear noise and reduced fatigue.
- Bearing bores on semi-float differentials are inspected for correct dimensional tolerances. Bores can become distorted from wear and if the bearing race has spun in the bore. Bores that are found to be out of round are machined and sleeved to original dimensions.
- Electric and air lockers for Jeep differentials are installed if your application is so equipped.
During the remanufacturing process, JASPER has the ability to remanufacture axle ends on full-float applications up to 1 ½ tons. JASPER has a rigorous testing process and have led the industry since 1942.
Phone and Map available
Click here for more info
- 815 Wernsing Road